The Fluke® 710 valve testing loop calibrator is designed to enable quick easy tests on HART smart control valves. Special test procedures built into the 710 enable users to initiate a test and get quick answers on the health of the valve. Test results of good/marginal/bad after a test will help the user to decide if additional maintenance is necessary.
Fluke® Loop Valve Tester, 24 VDC Loop, 20 mA Loop, LCD Graphic with Backlight, 6 x 3.6 x 1.3 in
Size |
: |
6 x 3.6 x 1.3 in |
Loop Voltage Rating |
: |
24 VDC |
Loop Amperage Rating |
: |
20 mA |
Display Type |
: |
LCD Graphic with Backlight |
- Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test and bump/partial stroke test
- ValveTrack™ software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
- Valve testing, mA calibration with HART valve tester
-
Instruction/Installation Manual
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fluke_FLUKE_710_Manual.pdf
-
Owners/User Manual
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fluke_FLUKE_710_User_Manual.pdf
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_a4e670af6bddcc76bd3b9a4efc5082a0da71d695aafa798ca4d74f7dab8f0062.pdf