The HomeWorks® QS visor controls allow lights, shades/draperies and other equipment to be controlled from the car with just a touch of a button on a visor control transmitter or a HomeLink® compatible visor control. Up to ten (10) transmitters can be used with a visor control receiver. The receiver provides two (2) contact closure inputs (CCI) for integration with other systems and one (1) CCI for security systems. The CCIs can be configured to accept maintained or momentary contact closures. The security input is always a maintained CCI. The receiver also has four (4) maintained or momentary contact closure outputs (CCO) to control up to four (4) garage doors or motorized gates. Pre-printed and blank labels are included with the visor controls for naming scenes or buttons] on both the receiver and the transmitter.

RadioRA® 2 HomeWorks® QS Visor Control Transmitter, Series: LR Series, 6.5 W, Surface Mount, PELV Cable, 60 Hz, Plastic, 3-1/4 in Width, 1-1/2 in Height, 3/4 in Depth, Snow

• (2) contact closure, (1) security input, (4) momentary or maintained contact closure output connections
• Mount receiver on a wall, ceiling or level surface using the two NO 6 (M3) screws, clip transmitter to a vehicle's visor
• 120 VAC input voltage, 6 VAC, 10 mA transmitter power
• 1.6 W typical power consumption
• -40 to 235 deg F transmitter ambient operating temperature, 0 to 90% humidity, non-condensing
• The typical operating distance between a receiver and a transmitter is 150 ft (46 m)
• System devices operate on frequencies between 431 MHz and 437 MHz
• Full or flash security options
• The transmitter can remotely control the keypad, security input and outputs buttons on the receiver
• Each output can be controlled locally at the receiver or remotely by a transmitter or keypad button