The SBGR PC series of on/off outdoor rated Photocontrol sensors provides intelligent control of lighting for daylight harvesting applications. Designed to recess mount into a 2.65 in (6.73 cm) square opening in a fixture, the sensors work by monitoring daylight conditions, then controlling connected lighting so as to insure that adequate lighting levels are maintained. The SBGR PC provides on/off style Photocontrol control, turning off the lights when sufficient daylight is present and turning them on when additional lighting is necessary. The SBGR PC series sensors are line powered and can switch loads directly without the need for a power pack.

Sensor Switch™, SBGR 6 ODP WH 4V, Motion Sensor, Line Voltage, Series: SBGR, 120 to 277 VAC, 50/60 Hz Frequency, PIR Sensor, IP65 Enclosure, Ceiling Mounting, White, 3.4 in W x 1.4 in D x 3.4 in H Dimensions

• 100% digital PIR detection, excellent RF immunity
• Integrated photocell
• Self-contained relay for switching
• Compatible with 0 to 10 VDC dimmable ballasts and LED drivers
• Interchangeable hot and load wires, impossible to wire in reverse
• Adjustable time delay, maximum/minimum Dimmable levels and ramp rates
• Programming button accessible without opening sensor or removing gaskets
• No field calibration or sensitivity adjustments required
• Non-volatile settings memory
• Convenient test mode
• Green LED indicator
• 0 to 10 VDC dimming level
• 15 to 30 ft mounting height
• On/Off/dimming photocell
• 4 VDC min dimming setting
• Outdoor high mount embedded motion sensor

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sensor_Switch_SBGR_6_ODP_WH_4V_Instructions.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_0ff1e50746c52d9caaec5a4e5a5f7555738213474d8dac225843ddde9f17462e.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Gotham_Lighting_F27TT_35_GE_J2_Warranty.pdf