3M™ motor lead in-line splicing kits 5316/5319 series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of in-line connections at 1000 V and less. The splice's main component, the slip on splice cover is made from EPDM rubber. A mastic strip is used for the moisture seal.
3M™, 5318, Motor Lead Splice Kit, In-Line, Series: 5300, 5/8 kV, Non-Shielded Cable, 2 AWG to 250 kcmil Conductor, 0.53 to 0.88 in OD Insulation, 11 in Splice Length, 1 Conductors, Pigtail Connector, 90 deg C, EPDM Rubber, Black, 11 in L Dimensions
| Cable Type | : | Non-Shielded |
| Color | : | Black |
| Connector Type | : | Pigtail |
| Dimensions | : | 11 in L |
| Insulation Size | : | 0.53 to 0.88 in OD |
| Number of Conductors | : | 1 |
| Series | : | 5300 |
| Temperature Rating | : | 90 deg C |
| Type | : | In-Line |
| Voltage Rating | : | 5/8 kV |
| Conductor Size | : | 2 AWG to 250 kcmil |
| Splice Length | : | 11 in |
| Material | : | EPDM Rubber |
- Fast and simple installation
- No torches or heat source required
- No special tool required to install splice
- THK walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connection for 1000 VAC and less cables sized 16 AWG to 500 kcmil
- Suitable for use with 30000 series copper compression lugs or other UL listed copper lug
- 365 V mil dielectric strength
- 750% elongation
- 1400 psi tensile strength
- 1-1/4 in L maximum bolt
- Polyethylene cable
- 2 AWG to 250 kcmil feeder cable and motor lead conductor
Instruction/Installation Manual