The XPoint™ wireless sensor interface translates data between standard low voltage wired devices to an XPoint™ wireless system. This translation enables standard stations to join an XPoint™ wireless lighting control system. The sensor interface incorporates the XPoint™ wireless protocol, which is based on the open standard IEEE 802.15.4, providing fail safe communication by forming a self-healing, adaptive mesh network that maintains connectivity, regardless of site conditions.

LC&D™ XPoint™ Wireless Sensor Interface, For Use With: XPoint™ Wireless Light Controller, 50 mA, 120 to 277 VAC, 2-Input Channel, 2-3/4 in H x 3-1/4 in W x 1-3/8 in D

• Suitable for mounting on an electrical junction box (J-box)
• Non-volatile memory retains device settings during power outages
• Data transmission from wall stations to XPoint™ wireless system
• Detachable snap lever terminal for rapid, tool free connection to low voltage wiring
• 2-input channels for low voltage sensing/wall stations
• Fixture integrated network connectivity provides simple installation and reliable performance
• Programming instructions and logic are stored in the luminaire
• Group lights and sensors for a uniform response
• Schedule custom light levels
• Programmable light levels, time delay and dimming rate
• Automatic demand response and open ADR protocol
• System overrides through building management protocols such as BACnet™

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/LC_D_XPA_SIAC2_L2_Instruction_Sheet.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_a7e12ae141fbc650c04a364b073828710c67cc6947b9bd31d35e2a0dff62aa65.pdf