3M™ cold shrink/armor cast, armored or non-armored splice kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. connectors are not included. Kits include armor cast structural material to reconstitute the cable's armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
3M™, 5551, Splice Kit, 1-Cable Cold Shrink In-Line, Series: 5550, 5/8 kV, Tape Shield/Unshielded/Wire Shield Cable, 6 to 4/0 AWG Conductor, 0.45 to 0.88 in OD Insulation, 19 in Splice Length, 1 Conductors, 90 to 130 deg C, EPDM Rubber, Black
| Cable Type | : | Tape Shield/Unshielded/Wire Shield |
| Color | : | Black |
| Insulation Size | : | 0.45 to 0.88 in OD |
| Number of Conductors | : | 1 |
| Series | : | 5550 |
| Temperature Rating | : | 90 to 130 deg C |
| Type | : | 1-Cable Cold Shrink In-Line |
| Voltage Rating | : | 5/8 kV |
| Conductor Size | : | 6 to 4/0 AWG |
| Splice Length | : | 19 in |
| Material | : | EPDM Rubber |
- Provides splicing on tape shield, wire shield and UniShield® cables
- This kit is suitable for use on solid dielectric cables, indoor or outdoor locations and direct burial applications
- Insulator and jacket is made of EPDM for easy installation
- Optional ground strap assembly GS-1
- 6 to 4/0 AWG copper, 6 to 3/0 AWG aluminum conductor range
- 3.3 in copper maximum conductor length, 2.7 in aluminum maximum conductor length
- 1400 psi tensile strength
- 750% elongation
- 365 V/mil dielectric strength
- 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 4 AWG, 4/0 AWG Copper, 6 AWG conductor sizes
- 3 splices/Kit, 1/Case
Instruction/Installation Manual