The Chelsea DigitalSwitch is a 100% digital switch that may be programmed to control any relay, dimmer or panel. Connected to any GR 2400™ system via Cat. 5 patch cable with RJ45 connectors, Chelsea DigitalSwitches can be mounted in any standard 2.25 in D switch box with a decorator style switch plate. Chelsea DigitalSwitches can be ordered with 1, 2, 3, 4 or 6 buttons per gang with custom engraved buttons at no cost. Switches can be ordered preprogrammed or may be programmed in the field using the DTC (Digital Time Clock). All Chelsea DigitalSwitches are 100% backwards compatible with all LC&D™ systems.
LC&D™ GR 2400™ Digital Switch, Chelsea Low Voltage Wallstation, Series: CH1, ON/OFF/Mixed/Group Control/Toggle/Scene Control, Wall Mounting, 32 to 104 deg F, White, 4 in H x 1.3 in W x 1.3 in D Dimensions
| Control | : | ON/OFF/Mixed/Group Control/Toggle/Scene |
| Dimensions | : | 4 in H x 1.3 in W x 1.3 in D |
| Mounting Type | : | Wall |
| Series | : | CH1 |
| Temperature Rating | : | 32 to 104 deg F |
| Type | : | Chelsea Low Voltage Wallstation |
| Color | : | White |
- Custom button engraving (2 lines 8 character/line)
- Pilot light to illuminate all push buttons
- Ability to be linked to up to 127 digital addresses via Cat. 5 patch cable with RJ45 connectors
- Enable/disable by optional key enable switch
- A green locator light at the top of each unit which is always on and can be programmed to blink to show horn driver mode or help locate a switch in the dark
- Programmable status LED logic
- Adjustable debounce time to avoid accidental triggers
- Audible beep alert for warning or switch locating
- Alternate button programming to allow more flexibility of use including using one button to perform different tasks at different times of the day
- Ability to be digitally enabled/disabled over the bus on a per button or per switch basis
- Decorator switch plate
- 2-1/4 in D switch box mounting
- (1) address per switch
- Powered from GR 2400 bus power supply inputs
- Via DTC or with GX2 lighting control software programming
- 10 to 90% non-condensing maximum humidity
- Two RJ45 bus connectors
- Manual end of line termination with jumper
- Variable timers allow for delays, blink warns and temporary sensor disables
- Intelligent daylight harvesting provides multiple levels of light from a single sensor and can be configured for constant, temporary or no override of lights
Specification Sheet