Philips Lightolier Lytecaster® LED downlights are ideal general purpose down lighting solution, providing comfortable, quality light. Available in new construction and remodeler frame with interchangeable light engine that is offered in two lumen packages. The downlight is wet location listed and comes in 3 standard option.
Signify Luminaires Lightolier Frame-In Kit, Round Screw, Series: L5R, 5 in Fixture, LED Fixture, Ceiling Mounting, For Use With: Philips LyteCaster® LED Downlight, Steel, Galvanized
| Finish | : | Galvanized |
| Mounting Type | : | Ceiling |
| Series | : | L5R |
| Suitable For Use With | : | Philips LyteCaster® LED Downlight |
| Type | : | Round Screw |
| Fixture Size | : | 5 in |
| Fixture Type | : | LED |
| Material | : | Steel |
- 0.026 in galvanized steel
- 0.026 in galvanized steel, accommodates ceilings up to 1-1/4 in (32 mm) THK 3/8 in (9.5 mm) deep integral lip with four notches at 90 deg apart to simplify alignment
- 2.5 x 5-3/8 x 2 in (27 cu-in) 0.032 in galvanized steel UL listed 90 deg supply conductors, rated for branch circuit wiring supplying connected luminaries (daisy chaining)
- Permit easy and fast installation of light engine/trim
- 0.059 in galvanized steel, bars pivot for easy attachment and wire-in below ceiling line, bars extend to accommodate 16 in (406 mm) to 24 in (610 mm) OC joist spacing
- Bars can accommodate 12 in (305 mm) OC joist spacing after a slight field modification (see Instruction sheet), features integral self-tapping Phillips/square drive screws for secure attachment to wood or metal construction
- Also available with integral nails, attaches to T-bar ceilings without the need of accessories, bars installed on shortest dimension of frame, but can be easily repositioned 90 deg from original position
- 120 VAC, 50/60 Hz RoHS compliant, class 2 power supply, complies with FCC rules per title 47 part 15 (class B) for EMI/RFI (conducted and radiated)
- Class A sound rating 0 to 10 VDC, 120/277 VAC, 50/60 Hz, RoHS compliant, class 2 power supply, complies with FCC rules per title 47 part 15 (class A) for EMI/RFI (conducted and radiated), class A sound rating
- 5-1/2 in ceiling cutout
- AirSeal® IC, new construction, screw
- ELV dimming
- AirSeal® housing minimizes air leakage to less than 2 cfm at 1.57 PSF (or 75 Pa), which complies with the international energy conservation code and Washington state energy code (section 502.4)
- This reduces heat loss and condensation in ceiling
- UL listed for direct contact with thermal insulation
- Locks into position along length of mounting bars with locking screws
- Access door for inspection of junction box
Specification Sheet