TG8 Lensed Troffer is a quality low-profile recessed luminaire with specification features. It is designed around T8 lamps and electronic ballasts.
Day-Brite, 2TG8231U6-01-UNV1/2EB, Indoor Troffer, Series: TG8, 120 to 277 VAC, 32 W Fixture, T8 Lamp, 31 W Lamp, 2 Lamps, 50000 hr Average Life, White Light, 4000 K Color Temperature, 80 CRI, Electronic Ballast, Prismatic Acrylic Lens, 5400 Lumens, NEMA G Enclosure, Ceiling Mounting, Steel Housing Material, 4 ft L x 2 ft W x 3 in H Dimensions
Average Life |
: |
50000 hr |
Ballast Type |
: |
Electronic |
Color Rendering Index (CRI) |
: |
80 |
Color Temperature |
: |
4000 K |
Dimensions |
: |
4 ft L x 2 ft W x 3 in H |
Enclosure Type |
: |
NEMA G |
Lamp Wattage |
: |
31 W |
Lens Type |
: |
Prismatic Acrylic |
Light Color |
: |
White |
Lumens |
: |
5400 Lumens |
Mounting Type |
: |
Ceiling |
Recessed Trim Type |
: |
Grid |
Series |
: |
TG8 |
Number of Lamps |
: |
2 |
Lamp Type |
: |
T8 |
Fixture Wattage |
: |
32 W |
Voltage Rating |
: |
120 to 277 VAC |
Housing Material |
: |
Steel |
- Shallow body minimizes required plenum clearance
- T-Bar grid clips built into luminaries, no extra parts required, designed for use with standard grid ceiling members, 1-1/2 in maximum height
- Full C channel door frames for improved lens support and reduced shipping damage
- Flat steel door frame features smooth rolled edges inside and outside
- Door frame uses T-hinges and can be hinged and latched from either side
- Opposable stainless steel spring loaded latches are standard for easy operation and consistent retention
- Grid ceiling, revised housing, one 2-lamp ballast
- Electronic ballast, <10% total harmonic distortion (THD), standard ballast factor
- Smooth rolled edges on housing and door frame for easy handling
- Pattern 12, prismatic acrylic lens
- White door
- Lamp pin openings in housing ends for easier relamping when using straight lamps
- Integral baffling system to prevent light leaks
- Integral wire hanger holes for independent wire suspension
- Embosses with holes provided in housing end for screwing to T-Bar if desired
- Factory installed access plate in housing top includes 7/8 in hole with rolled edge and 7/8 in knockouts
- Carton includes integral carrying handle for easy handling and tear tape for easy opening
- 3 in D nominal housing
- Direct distrubution type
- T-Bar screw provisions built-in