The Kidde® PI2010 is a 120 VAC, wire-in smoke alarm with 9 VDC battery backup. This smoke alarm functions as a stand alone unit or in an interconnected system. The Kidde® PI2010 features Hush™, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde® strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. The Kidde® PI2010, 120 VAC, wire-in smoke alarm with 9 VDC battery back up provides continuous protection against smoke and fire hazards, even during power outages. The Kidde® PI2010 interconnects with up to 24 Kidde® devices of which 18 can be initiating. This unit also includes flashing LEDs to signal the alarm is functioning properly, a low battery warning and a loud 85 dB alarm. The Kidde® PI2010 is UL listed and includes a 10 years limited warranty.

Kidde® Smoke Detector Alarm, Tamper-Resistant, 120 VAC with 9 VDC Battery Backup Power Source, 10 ft Detection, Dual Ionization/Photoelectric Sensor, Alarm: Audio, Up to 24 Devices Interconnection, 85 dB Alert, Red LED Visual Alert, 85 % Humidity, Pre-Stripped Wire Lead Wiring, 40 to 100 deg F Operating, Plastic, White, 5.75 in Dia x 1.8 in D

• Contains both a photoelectric and ionization sensor
• Ionization sensor may detect invisible fire
• Photoelectric sensor may detect visible particles
• Hush® temporarily silences nuisance alarms
• The right alarm, the right location each of the four smoke alarms includes features designed to address location specific safety needs, such as an LED light in the hallway
• Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
• Battery backup (9 VDC battery included) provides continuous protection even during power outages
• Tamper-resistant deters from tampering or theft
• Red LED flashes every 30 to 40 s to indicate that the smoke alarm is operating
• Test/reset button tests smoke alarm circuitry and horn

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520556859437.pdf
• VIDEO LINK http://www.youtube.com/watch?v=j9JN9LA0N90
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1480871345931.pdf