Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1A to 1000A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.
Fluke® Current Clamp, AC/DC, 600/1000 A/600 VAC Electrical Rating, 10 kHz Frequency, 2% + 0.5 A at 45 to 400 Hz/3 % + 0.5 A at 400 Hz to 2 kHz AC Current Accuracy, Safety Rating: CAT III 600 VAC, 9 VDC Alkaline Battery Power Source, 14 to 122 deg F Operating, 8.21 in L x 1.87 in W x 3.09 in H Dimensions
| AC Current Accuracy | : | 2% + 0.5 A at 45 to 400 Hz/3 % + 0.5 A at 400 Hz to 2 kHz |
| Dimensions | : | 8.21 in L x 1.87 in W x 3.09 in H |
| Operating Temperature | : | 14 to 122 deg F |
| Power Source | : | 9 VDC Alkaline Battery |
| Safety Rating | : | CAT III 600 VAC |
| Type | : | AC/DC |
| Electrical Ratings | : | 600/1000 A/600 VAC |
| Frequency Rating | : | 10 kHz |
- 1 to 600 A AC, 1 to 1000 A DC continuous current
- 1000 A maximum non-destructive current
- 0.5 A lowest measurable current
- DC to 10 kHz useable frequency
- 1 mV/A output levels
- 60 hr battery life
- 30 mm maximum conductor diameter
- 2 x 25 mm maximum conductor size
- 1.6 m output cable length
Instruction/Installation Manual