NSI Tork® Photocontrol, Stem, Series: 2110, 120 VAC, 50/60 Hz Frequency, 2000 W Tungsten, 1800 VA Ballast, SPST Contact Form, 2 min Timing, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC On/3 to 15 FC Off Sensitivity, Environmental Conditions: -40 to 140 deg F Operating Temperature, Surface Mounting, Die Cast Aluminum
| Contact Form | : | SPST |
| Environmental Conditions | : | -40 to 140 deg F Operating Temperature |
| Frequency Rating | : | 50/60 Hz |
| Sensitivity | : | 1 to 5 FC On/3 to 15 FC Off |
| Sensor Type | : | Cadmium Sulfide Cell |
| Series | : | 2110 |
| Timing Range | : | 2 min |
| Type | : | Stem |
| Wire Size | : | 16 AWG |
| Voltage Rating | : | 120 VAC |
| Tungsten Rating | : | 2000 W |
| Ballast Load | : | 1800 VA |
| Mounting Type | : | Surface |
| Material | : | Die Cast Aluminum |
- 600 VA LED lamp rating
- 1/2 in Dia stem
- Under 1 W power consumption
- Conduit mount
- Delay of up to 2 min to prevent false switching due to light from passing vehicles, lightning
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
- Photocell responds to the light spectrum near to that of a human eye
- Remain closed between dusk and dawn contact
- Three color coded, minimum 6 in wire leads, rated for 105 deg C
Catalog
