NSI Tork® Photocontrol, Series: 2110, 120 VAC, 50/60 Hz, 3000 W Tungsten, 3000 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Stem/Surface Mount, Die Cast Aluminum, 3-3/4 in L x 2 in W x 1-1/2 in H
| Contact Form | : | SPST |
| Dimensions | : | 3-3/4 in L x 2 in W x 1-1/2 in H |
| Environmental Conditions | : | -40 to 140 deg F Operating Temperature |
| Frequency Rating | : | 50/60 Hz |
| Sensitivity | : | 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio |
| Sensor Type | : | Cadmium Sulfide Cell |
| Series | : | 2110 |
| Timing Range | : | 2 min |
| Wire Size | : | 16 AWG |
| Voltage Rating | : | 120 VAC |
| Tungsten Rating | : | 3000 W |
| Ballast Load | : | 3000 VA |
| Mounting Type | : | Stem/Surface |
| Material | : | Die Cast Aluminum |
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
- Die cast aluminum housing and base, gasketed for weather protection
- Works with screw base CFL
- Cadmium sulphide, epoxy conformal coated 1/2 in diameter, 1 in cell
- Remain closed between dusk and dawn (the unit fails in the on position) contacts
- Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
- Cadmium sulphide
Catalog
