NSI Photocontrol, Series: 2100, 120 VAC, 50/60 Hz, 2000 W Tungsten, 1800 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Stem/Surface Mount, Die Cast Zinc
| Contact Form | : | SPST |
| Environmental Conditions | : | -40 to 140 deg F Operating Temperature |
| Frequency Rating | : | 50/60 Hz |
| Sensitivity | : | 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio |
| Sensor Type | : | Cadmium Sulfide Cell |
| Series | : | 2100 |
| Timing Range | : | 2 min |
| Wire Size | : | 16 AWG |
| Voltage Rating | : | 120 VAC |
| Tungsten Rating | : | 2000 W |
| Ballast Load | : | 1800 VA |
| Mounting Type | : | Stem/Surface |
| Material | : | Die Cast Zinc |
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
- Photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
- Gasketed for maximum weather protection
- Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
- 1 W power consumption
Specification Sheet
