3M™ 7000005943 8427-12 3M | Fromm
Send Print
  1. pin-int

3M™ 7000005943

3M™ 7000005943 8420 Cold Shrink Insulator, 35.1 mm Dia Min, 16.8 mm Max Diameter, 1400 psi Tensile Strength, EPDM Rubber Insulation

  • Manufacturer Name: 3M
  • MPN: 7000005943
  • Brand Name: 3M™
  • UPC: 054007344599
  • FEPN: 8427-12 3M
  • Min Order Qty: 1
  • Quantity Interval: 10
  • Inventory Availability loading

Our 3M™ connector insulator 8420 meets all your splice insulation needs because it can be used as a cold shrink insulator on all solid dielectric insulated wires and cable splices. It also gives you excellent moisture protection for secondary splices, dig-in repairs and direct buried or submersible cable. The watertight seal it creates is durable and long-lasting to deliver a solid barrier for high voltage lines, air insulated connectors or lugs. Our 8420 connector insulator is ansi certified and rohs 2011/65/EU Compliant.

3M™, 7000005943, Insulator, Cold Shrink, Series: 8420, 35.1 mm Diameter Minimum, 16.8 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black

Color       :      Black
Dielectric Strength       :      365 V/mil
Elongation       :      7.5
Series       :      8420
Type       :      Splice
Minimum Diameter       :      35.1 mm
Maximum Diameter       :      16.8 mm
Tensile Strength       :      1400 psi
Material       :      EPDM Rubber Insulation
  • Simple installation, requires no tools and accommodates a wide-range of cable sizes
  • Copper conductor with polyolefin foam
  • No torches or heat required, good thermal stability
  • Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
  • Excellent wet electrical properties
  • Tough rubber formulation withstands backfilling
  • Water-resistant, no mastic or tape required to seal
  • Resists acids, alkali and ozone
  • Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts
  • Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
  • Insulation of secondary splices, copper or aluminum conductors
  • Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
  • Insulation of in-line conductor transition connectors
  • -40 to 194 deg f temperature rating, 1 kV voltage rating
  • UniShield®, wire shield, non-shielded, tape shield cable
  • 12 in relaxed tube length, 8 in max connector length
  • 0.67 min Dia cable for seal, 1.38 in Dia insulator cable or connector covers
  • 250 to 400 kcmil conductor size
  • One conductor, 250 kcmil, 400 kcmil, 300 kcmil, 350 kcmil conductor size
  • pdfInstruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_ff89bee8c5c19c399fd544ac893cf04d08eff89c3d6e8dc3689b01527359c011.pdf
  • pdfLine Drawing https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_e3be9b352b78cba6ba15cbd3f36f8771603980d78428e343886f2d37d8fc3e81.pdf
  • pdfSDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_dbcdd296a8e947aabc80cbb392c2b75076b34dbf903c357500b17c71cf1d20fb.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_488b9f8e0da05715ee0459eb0f04af2eb14a42f4492db1301bb1aebb5a47fd6c.pdf