Hubbell multi-level relays provide the perfect retrofit solution for bi- or tri-level lighting in existing buildings. Control is accomplished with a traditional single pole light switch. Turn the switch on and get the first level. Turn off and on again to get full power. This gives occupants more control over illumination in their area. The multi-level relay also provides savings. Using these relays also helps with the lighting power allowances in ASHRAE 90.1 and many local codes such as California Title 24. Existing buildings are not typically wired to support bi-level or tri-level control methods. Hubbell multi-level relays eliminate the need for running extra circuits and installing additional switches. The relays are designed to mount in fixture wiring trays for installation simplicity. This allows installers to quickly utilize bi-level ballasts or employ alternating fixture control to reduce energy use. Combining these relays with occupancy sensors further enhances savings by making sure lights go off when the area becomes unoccupied and then returning to the lower lighting level when occupants return.
Wiring Device-Kellems H-MOSS® OPTIMYZER™ Tri-Level Relay, 120/208 to 277 VAC, 5 A, Screw Mounting, Lead Wire Terminal, 3.75 in L x 1.66 in W x 1.18 in H Dimensions
| Dimensions | : | 3.75 in L x 1.66 in W x 1.18 in H |
| Mounting Type | : | Screw |
| Terminal Type | : | Lead Wire |
| Voltage Rating | : | 120/208 to 277 VAC |
| Amperage Rating | : | 5 A |
- Uses existing wall switches
- Up to 50% energy savings
- Bi-level lighting control with one power feed
- No need to re-circuit
- Installs easily in wiring compartment of light fixture
- Passive energy savings
- Can be used with Hubbell® motion sensors
Specification Sheet