Adjustable Gland Plates are used to seal the bottom of the ProLine frame. Solid, vented and shielded Gland Plates are available. Solid and filtered gland plates include covers that are gasketed to maintain Type 12 enclosure requirements. Gland plates are 16 gauge steel and are finished with RAL 7035 textured light-gray polyester powder paint. EMC Gland Plates are finished with paint over plated surfaces. All installation hardware is included. Solid Gland Plate and EMC Gland Plate are accessories to 100-mm Solid Base, 100-mm/200-mm Plinth Base, Mobile Base and Transportation Base. These gland plates can be used without a base if casters, levelers or frame feet are installed. EMC Gland Plate maintains a Type 1 rating.

Hoffman ProLine™ Gland Plate, Solid, Series: P20, For Use With: ProLine™ 800 mm W x 800 mm D Enclosure Single Bay Frames and Sub Panels/Rack Angles, Steel, Polyester Powder Painted, Light Gray

• Solid gland plates include covers that are gasketed to maintain NEMA 12 enclosure requirements
• The gland plate consists of a base mounting surface and two adjustable foam gasketed plates that permit cable entry
• The plate can be rotated 180 deg for front or rear cable entry

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_PGP104_Installation_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_PPB1106_Specification_Sheet.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_F1010G36_Warranty.pdf