Each inhibitor contains a special chemical combination that vaporizes and condenses on all surfaces in an enclosed area. Vapors will redeposit as needed in the event of condensation of moisture on surfaces. These vapors reach every part of an enclosure, protecting all interior components. Spraying, wiping or greasing are not required. This eliminates precoating, special wraps and drying agents. Protection is effective even in salt-water atmospheres. The AHCI5E and AHCI10E emitters have additional red-metal inhibitors for further protection. Enclosures containing corrosion inhibitors must be reasonably sealed.
Hoffman Corrosion Inhibitor, Industrial, Series: A80, Tape, 60 cu-ft
| Series | : | A80 |
| Type | : | Industrial |
| Container Type | : | Tape |
| Container Size | : | 60 cu-ft |
- Protects against salt and high humidity
- Eliminates the need of oiling, plating or dipping metal
- Puts protected equipment to use immediately without degreasing or coating removal
- Emitter protects 10 ft.3 (283 liters) of enclosure volume for approximately two years from the date of manufacture
- The useful life (protection) depends on the moisture surrounding the application
- Severe environments recommend no more than 3 months before replacing, less severe recommend no more than 6 months before replacing
- Emitters contain additional red metal (non-ferrous) inhibitors
Specification Sheet