T&B® HT2 HT2 TB | Fromm
Cart  (0)
Find A Location
Shop Now

610.374.4441

For Emergency Service Press 4

T&B® HT2
Send Print
  1. pin-int

T&B® HT2

T&B® CHASE® HT2 HT Series Conduit Hub With Insulated Throat, 3/4 in, For Use With Threaded IMC/Rigid Conduits, Die Cast Aluminum, Aluminum Lacquered

  • Manufacturer Name: ABB - Installation Products
  • MPN: HT2
  • Brand Name: T&B®
  • UPC: 042269491502
  • FEPN: HT2 TB
  • Min Order Qty: 1
  • Quantity Interval: 1
  • Inventory Availability loading

For over 100 years the T&B® brand has been recognized as the leading brand of electrical fittings. industry standards such as Liquidtight® fittings, Erickson® couplings and many others are registered trade marks. The innovation continues with numerous products and features for both ordinary and hazardous locations.

T&B® CHASE® Conduit Hub, Series: HT Series, 3/4 in Size, For Use With: Threaded IMC/Rigid Conduits, Die Cast Aluminum, Aluminum Lacquered, 1-21/32 in Dia Dimensions

Dimensions       :      1-21/32 in Dia
Series       :      HT Series
Size       :      3/4 in
Suitable For Use With       :      Threaded IMC/Rigid Conduits
Material       :      Die Cast Aluminum
Finish       :      Aluminum Lacquered
  • CHASE® design provides maximum space for wiring in the box, locking nipple sits flush in the enclosure
  • Locking nipple should be knurled for positive rounding and be special flush design for extra wiring room
  • Plastic insulated throat, precision cast and machined surfaces permit safer wire pulling
  • Captive O-ring fits snugly in groove preventing loss and fumbling with parts
  • Knurled inner face of locking nipple provides 360 deg of locking and bites through box wall to ensure grounding
  • Locking nipple has tightening lugs on two planes for easier assembly in hard to reach field conditions
  • Grounding hubs have a ground screw located within the enclosure providing a Tamper proof ground for device
  • Locking nipple design permits replacement of the box without disassembling the installation
  • Buna-N O-ring
  • Plastic insulating sleeves
  • Suitable for use where the system is normally hosed down (NEMA 4) for cleaning
  • Suitable for use in wet locations
  • 1/2-14 NPT thread
  • 1-3/32 in mounting hole
  • 3/16 in panel width
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_76078a44a3766809e02eb56dfe93f5c1123c0d3c9678a4e9f3b980a110242f13.pdf