Crouse-Hinds series pull elbows are installed in conduit systems to make 90 bends in rigid or IMC conduit systems where space is limited, or to connect rigid or IMC conduit to a box or enclosure. Pull elbows also act as outlets, with removable covers that provide access to conductors for maintenance and future system changes. Condulet tees are installed in concealed conduit runs, allowing a single conduit stub-up to outlet boxes located above or below the main conduit run, eliminating separate feed and return conduits to a flush floor box or junction box.

Crouse-Hinds Pull Elbow, Raintight, 1-1/4 in Trade, 90 deg Angle, For Use With: Combination EMT to Rigid/IMC Conduit, Die Cast Zinc, Gray, Plated

• Raintight

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_2f157576149e67aaa0407621fd31cccfc432d1d23044820d55fcf15c36e1891f.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_dbe6ec76a60da84f8da41037b8f556714d03744d8d6a641ee3c9a0bbc0b2d48e.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_7008287bdd9ca7b120b82cfb4abc19d9f914fac151099020494f3eea1fec1b6d.pdf