EDS factory sealed snap switches or manual motor starting switches do not need external sealing. The switches are enclosed in a unique sealing well with double flanges which mate with the cover and the body. Small, compact enclosures have accurately ground wide flanges on body, cover and sealing well for flame-tight joints. Wiring pigtails are factory sealed from under-the sealing well. Reliable pouring of seals at the factory ensures safe sealing.
Crouse-Hinds FlexStation™ Selector Switch Control Station, 1-Gang Factory Sealed Heavy Duty Through-Feed, Series: EDS, 600 VAC, 2NO-2NC Contact Configuration, Maintained Contact Mode, Front Operator, 3/7B/7C/7D/9E/9F/9G NEMA Rating, Feraloy® Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions
Contact Mode |
: |
Maintained |
Dimensions |
: |
5-7/8 in L x 3-1/2 in W x 3-1/16 in H |
Finish |
: |
Electro-Galvanized/Aluminum Acrylic Painted |
Material |
: |
Feraloy® Iron Alloy |
Operator Type |
: |
Front |
Series |
: |
EDS |
Type |
: |
1-Gang Factory Sealed Heavy Duty Through-Feed |
Voltage Rating |
: |
600 VAC |
Contact Configuration |
: |
2NO-2NC |
NEMA Rating |
: |
3/7B/7C/7D/9E/9F/9G |
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Explosionproof, dust-ignitionproof and raintight
- 1 in hub
- 2-position, 2-circuit
- ED11 replacement contact blocks
-
Catalog
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_e26a3e83b3815db004298b4319b6b776b36985231733f6f7bf8746bdee9db48b.pdf
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_9e785cbbcfcd740889bd99dcc2d2435569750ac8681698885cac9d2e7a398920.pdf
-
Warranty Information
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_7008287bdd9ca7b120b82cfb4abc19d9f914fac151099020494f3eea1fec1b6d.pdf