EATON 10250T line of 30.5 mm pushbuttons features a heavy duty die-cast zinc construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the build-up of liquid inside the operator, which can prevent operation in freezing environments.
EATON Non-Illuminated Pushbutton, Heavy Duty Oil/Watertight, Series: 10250T, 30.5 mm Size, 1NO Contact Configuration, Momentary Contact Mode, 10 A at 600 VAC, 5 A at 250 VDC Contact, Bezel/Housing: Polished Chrome Bezel, Flush Button Actuator, Saddle Clamp Terminal, NEMA 3/3R/4/4X/12/13/IP65 Enclosure, Flush Mounting, Die-Cast Zinc, Polished Chrome, Blue, Environmental Conditions: -17 to 66 deg C Operating Temperature, 95% Relative Humidity at 60 deg C
| Actuator | : | Flush Button |
| Bezel/Housing | : | Polished Chrome Bezel |
| Contact Mode | : | Momentary |
| Contact Rating | : | 10 A at 600 VAC, 5 A at 250 VDC |
| Enclosure Type | : | NEMA 3/3R/4/4X/12/13/IP65 |
| Environmental Conditions | : | -17 to 66 deg C Operating Temperature, 95% Relative Humidity at 60 deg C |
| Finish | : | Polished Chrome |
| Material | : | Die-Cast Zinc |
| Mounting Type | : | Flush |
| Series | : | 10250T |
| Terminal Type | : | Saddle Clamp |
| Type | : | Heavy Duty Oil/Watertight |
| Size | : | 30.5 mm |
| Contact Configuration | : | 1NO |
| Color | : | Blue |
- Heavy duty die-cast zinc construction
- Enclosed silver contacts with reliability nibs
- Diaphragm seals with drainage holes
- Grounding nibs on the operator casing
- Reliability nibs improve contact reliability even under dry circuit and fine dust conditions
- Drainage holes prevent build-up of liquid inside the operator which can prevent operation in freezing environments
- Grounding nibs bit through paint and other coatings to provide secure ground
Specification Sheet
