A swivel mechanism can be used to provide a machine operator a way to easily rotate an operator interface enclosure to a convenient operating position. Maximum rotation is 350 degrees. The low-profile swivel has a large center opening in addition to a large, wobble-free bearing surface. Swivel mechanism can be locked in any position. The swivel mechanism is designed for use between the bottom of an operator interface enclosure and a pedestal. Do not use the Swivel between an overhead support and an enclosure. he Swivel is cast aluminum with an anodized finish. Mounting hardware and gaskets are furnished. Integral stops are provided at 30-degree increments between 60 degrees and 180 degrees of rotation on catalog number ASWV88 only.
Hoffman Swivel Unit, Series: P1, For Use With: HMI Enclosures, Aluminum, Anodized, 4 in L x 4 in W x 1.06 in H
| Dimensions | : | 4 in L x 4 in W x 1.06 in H |
| Finish | : | Anodized |
| Series | : | P1 |
| Suitable For Use With | : | HMI Enclosures |
| Material | : | Aluminum |
- Swivel mechanism can be used to provide a machine operator a way to easily rotate an operator interface enclosure to a convenient operating position
- The low profile swivel has a large center opening in addition to a large, wobble-free bearing surface
- Swivel mechanism can be locked in any position, maximum rotation is 350 deg
- Swivel mechanism is designed for use between the bottom of an operator interface enclosure and a pedestal
- Swivel is cast aluminum with an anodized finish
- Integral stops are provided at 30 deg increments between 60 deg and 180 deg of rotation on catalog number ASWV88 only
- Accepts 24 x 24 x 16 in enclosures, 100 lb maximum load including enclosure
Instruction/Installation Manual