10316 type L non plug-in limit switches by EATON electrical sector are sold as complete assembled devices only with a wide array of operating head configurations. All switches are 1-pole 1NO-1NC.
EATON Limit Switch, Type J, Series: 10316, 600 VAC, 240 VDC, 10 A, 2NC Contact Configuration, 10 A at 600 VAC/240 VDC Contact, Snap Action, Rotating Shaft Actuator, Screw Connection, NEMA 1 Enclosure, 4.06 in L x 2.19 in W x 6.06 in H Size, -20 to 200 deg F Operating, Die-cast Aluminum
| Action | : | Snap |
| Connection Type | : | Screw |
| Contact Rating | : | 10 A at 600 VAC/240 VDC |
| Enclosure Type | : | NEMA 1 |
| Material | : | Die-cast Aluminum |
| Operating Temperature | : | -20 to 200 deg F |
| Series | : | 10316 |
| Size | : | 4.06 in L x 2.19 in W x 6.06 in H |
| Type | : | Type J |
| Voltage Rating | : | 600 VAC, 240 VDC |
| Amperage Rating | : | 10 A |
| Actuator | : | Rotating Shaft |
| Contact Configuration | : | 2NC |
- CW, CCW or CW and CCW operating modes are field convertible
- Double break make snap action contacts same polarity each pole
- Captive saddle clamp terminals accept up to 12 AWG wire
- Head can be mounted in any of four discrete positions, intervals of 90 deg
- 1/2 in NPT conduit entrance
- 500000 operations minimum electrical life and 5000000 operations minimum at full load mechanical life
- NEMA A600, R300 double break make snap action contacts
- 0.07 in travel to operate contacts
- 0.03 in travel to reset contacts
- 0.29 in total travel
- 4 lb force to operate contacts
- 8 oz minimum return force
Catalog