Signify Luminaires 1004ICX 1004ICX LT | Fromm
Cart  (0)
Find A Location
Shop Now

800.360.4441

For Emergency Service Press 4

Signify Luminaires 1004ICX
Send Print
  1. pin-int

Signify Luminaires 1004ICX

Signify Luminaires Lightolier Lytening® 1004ICX High Wattage Round Frame-In Kit, Incandescent Lamp, IC Insulation, 120 VAC, 5-1/2 in Ceiling Opening, Aluminum Housing

  • Manufacturer Name: Signify
  • MPN: 1004ICX
  • Brand Name: Signify Luminaires
  • UPC: 784197219826
  • FEPN: 1004ICX LT
  • Min Order Qty: 1
  • Quantity Interval: 1
  • Inventory Availability loading

For the fastest, most convenient installation in insulated ceiling residential construction. Accommodates new ceilings up to 2 in THK. Swivelock pivoting mounting bars permit installation and wiring below the ceiling. Pre installed nails or screws. Complies with air leakage requirements stated in the Model energy Code and the Washington state energy Code.

Signify Luminaires Lightolier Lytening® Frame-In Kit, High Wattage Round, 120 VAC, 5-1/2 in Ceiling Opening, Incandescent Lamp, IC Insulation, Recessed Mount, For Use With: Lytecaster® Downlight, 5 in Dia, 16.3 in Height, 15.8 in Width, 23-1/2 in Depth, Aluminum Housing

Depth       :      23-1/2 in
Diameter       :      5 in
Height       :      16.3 in
Mounting Type       :      Recessed
Suitable For Use With       :      Lytecaster® Downlight
Type       :      High Wattage Round
Width       :      15.8 in
Lamp Type       :      Incandescent
Insulation Type       :      IC
Voltage Rating       :      120 VAC
Ceiling Opening       :      5-1/2 in
Housing Material       :      Aluminum
  • Housing -20 ga aluminum, UL listed for direct contact with thermal insulation, AirSeal® housing minimizes air leakage to less than 2 cfm at 1.57 PSF (75 pa) and reduces heat loss and condensation in ceiling, access door for inspection of junction box
  • Mounting frame - 22 ga galvanized steel, accommodates ceilings up to 1 in thick, 3/8 in deep integral lip, locks into position along length of mounting bars with locking screw and bendable slot, four slots are positioned 90 deg apart to simplify alignment, push-in/twist-out roto-clips hold reflector flush to ceiling
  • Junction box - 2 x 4 x 3-1/2 in (22 cu-in) 22 ga galvanized steel, UL listed for maximum of (6) 12 AWG 90 deg C through branch circuit conductors, cable clamp permit attachment of non-metallic 14 to 12 AWG Romex® cable without tools or additional connectors
  • Mounting bars - 16 ga galvanized steel, bars pivot for easy attachment and wire-in below ceiling line, bars extend to accommodate 16 to 24 in OC joist spacing, bars can accommodate 12 in OC joist spacing after a slight field modification
  • Integral self tapping philips screws for secure attachment to wood or metal construction
  • Socket housing - impact extruded aluminum or galvanized steel
  • Socket - porcelain medium base, nickel plated screw shell, pre wired with 18 AWF SF1 (300 V 200 deg C) leads to junction box
  • Thermal protector located inside housing
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_2267a9fec4b1361715fe22933c954d0e99304d3ee385b60435488af982d7e090.pdf