Crouse-Hinds FlexStation™ Snap Switch Control Station, 2-Gang Factory Sealed Through-Feed, Series: EDS, 120/277 VAC, 20 A, 2 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy® Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 5-3/32 in L x 7-3/16 in W x 3-1/16 in H Dimensions
Actuator |
: |
Handle |
Connection Type |
: |
Thread |
Dimensions |
: |
5-3/32 in L x 7-3/16 in W x 3-1/16 in H |
Finish |
: |
Aluminum Acrylic Painted/Electro-Galvanized |
Material |
: |
Feraloy® Iron Alloy |
Mounting Type |
: |
Surface |
Number of Poles |
: |
2 |
Operator Type |
: |
Front |
Series |
: |
EDS |
Type |
: |
2-Gang Factory Sealed Through-Feed |
Voltage Rating |
: |
120/277 VAC |
Amperage Rating |
: |
20 A |
NEMA Rating |
: |
NEMA 3/7B/7C/7D/9E/9F/9G |
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Dust ignitionproof, raintight
- To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
- In conjunction with magnetic starters or contactors for remote control of motors
- For manual starting of small AC/DC motors
- To provide manual starting and stopping and motor running protection (with heater)
- 3/4 in hub
- On/off standard marking for 1-pole and 2-pole units
-
Catalog
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_4e8013b0179855329af29415db54a7d995da8d62e9f1ca9e5985c9614fda68f0.pdf
-
Specification Sheet
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_12dc49e6174449aa3493b0f4116ed9577618b01616b83f0130be8ff2deddc3ea.pdf
-
Warranty Information
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_7008287bdd9ca7b120b82cfb4abc19d9f914fac151099020494f3eea1fec1b6d.pdf