LBD and LBH bodies are installed at 90 deg bends in rigid conduit to act as pull outlets for conductors that are stiff due to large size or type of insulation and to make 90 deg bends in conduit system while allowing straight wire pulls in either direction.

Ocal® OCAL-BLUE® Conduit Pulling Elbow, Double Coated, Series: LBD, 2 in Trade, 90 deg Angle, For Use With: IMC/Rigid Conduits, Iron, Gray, PVC Coated

• Coated with a nominal 0.002 in (2 mil) blue urethane on both the interior and exterior before PVC coating is applied
• Cover openings on an angle, permitting conductors to be pulled Straight-through hubs from either direction
• Domed cover permits easy conductor bends, relieves strain on insulation
• Taper threaded hubs with integral bushings
• Industrial grade device boxes and raintight covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations
• Pressure sealing sleeves seal connections

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Ocal_BT3_G_Catalog.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_db0774fc5cc50491678372a2a5654107b9010eb0bf657fa35d04c708ba8fc116.pdf