HPS Fusion™ FS3000ACP
HPS Fusion™ FS3000ACP Dry Enclosed Control Transformer, 480/600 VAC Primary, 120/240 VAC Secondary, 3000 VA Power Rating, 60 Hz, 1 ph Phase
- Manufacturer Name: Hammond Power Solutions
- MPN: FS3000ACP
- Brand Name: HPS Fusion™
- UPC: 803423107420
- FEPN: FS3000ACP HP
- Min Order Qty: 1
- Quantity Interval: 1
-
Inventory Availability
-
Retail Price:
The HPS Fusion™ line of enclosed transformers are an indoor, cost effective approach ideally suited for single phase, general purpose industrial and light duty loads. Designed specifically for applications such as general purpose enclosed applications used to adjust a supply voltage to match a load requirement, supplying motor control circuits, signal and alarm systems, industrial lighting and circuit isolation and HVAC applications. The HPS Fusion™ general purpose transformer is enclosed in a type 1 enclosure allowing for easy mounting and installation via four mounting slots and two keyhole slots. Easy access to primary and secondary wiring compartment through removable covers, which are molded terminal blocks on units up to 3000 VA and coil face terminations on units over 3000 VA.
HPS Fusion™ Control Transformer, Dry Enclosed, 480/600 VAC Primary, 120/240 VAC Secondary, 3000 VA, 60 Hz, 1 ph, 25/12.5 A Maximum, Terminal Block, Panel Mount, 180 deg C Class F, NEMA 1, 40 deg C, 7.8 in L x 11.3 in W x 6.7 in H
| Connection Type | : | Terminal Block |
| Dimensions | : | 7.8 in L x 11.3 in W x 6.7 in H |
| Enclosure Type | : | NEMA 1 |
| Insulation | : | 180 deg C Class F |
| Maximum Amperage Rating | : | 25/12.5 A |
| Mounting Type | : | Panel |
| Temperature Rating | : | 40 deg C |
| Type | : | Dry Enclosed |
| Primary Voltage | : | 480/600 VAC |
| Secondary Voltage | : | 120/240 VAC |
| Power Rating | : | 3000 VA |
| Frequency Rating | : | 60 Hz |
| Phase | : | 1 ph |
- An indoor enclosed control transformer for easy surface mounting
- Molded terminal blocks for primary and secondary connections
- Coil face terminations over 3000 VA or 30 A
- All terminal blocks utilize a combination slot/Phillips #6 screw with a SEMS washer
- Coil face terminations utilize a 1/4-20 UNC x 0.5 in screw and a spring lock washer
- 10 standard voltage groups
- Rugged type 1 enclosure
- Primary and secondary ground screws
- Four wiring and accessory knockouts
- FS-N1 enclosure
Catalog