NuTone® Time Control, Plastic, White, Domestic
| Color | : | White |
| Material | : | Plastic |
| Domestic/Import | : | Domestic |
- 15 min timer works with all NuTone® heaters and fans (except pull chain type) for your convenience, 20 A current
- Push knob on shaft with the tail facing down
- The timer assembly is designed to mount in a 2-1/2 in deep single-gang box
- Run house power wiring (with ground) from fuse or circuit breaker box and wiring from ventilation fan (refer to fan motor plate for wiring instructions to motor) to timer in outlet box and make connections
- Strip wires approximately 1/2 in to make connections
- Insert wired timer into wall box with "TOP" (indicated on front cover) in proper position
- Fasten timer to wall box using (2) screws provided
- Fasten wallplate to timer using the (2) screws provided with the plate
- The screw must be self-tapped into the timer body and will require a gentle inward pressure while firmly turning the screw
- Position small plastic timer dial so that "OFF" is in the up position
- Connect wire to terminal screws in timer side
- Install hex nut and tighten
Catalog