Hi-Lume® 3D H3DT528CU110 H3DT528CU110 LU | Fromm
Cart  (0)
Find A Location
Shop Now

800.360.4441

For Emergency Service Press 4

Hi-Lume® 3D H3DT528CU110
Send Print
  1. pin-int

Hi-Lume® 3D H3DT528CU110

Hi-Lume® 3D H3DT528CU110 Electronic Dimming Ballast, T5 Linear Fluorescent Lamp, 28 W Lamp, 120/240/277 VAC, Programmed/Rapid, 1 Ballast Factor

  • Manufacturer Name: Lutron Electronics
  • MPN: H3DT528CU110
  • Brand Name: Hi-Lume® 3D
  • UPC: 027557977111
  • FEPN: H3DT528CU110 LU
  • Min Order Qty: 1
  • Quantity Interval: 1
  • Inventory Availability loading

Hi-Lume® 3D architectural electronic dimming ballasts are designed to meet the most demanding lighting requirements. By providing industry leading performance with a full-range of 100% to less than 1% fluorescent dimming, Hi-lume 3D ballasts enable you to provide the ideal visual environment for any application.

Hi-Lume® 3D Dimming Ballast, Electronic, T5 Linear Fluorescent Lamp, 28 W Lamp, 33.6/33 W, 120/240/277 VAC, 0.28/0.14/0.12 A, 50/60 Hz, Programmed/Rapid Start, 10 deg C Minimum Starting, Total Harmonic Distortion: 0.95, Dimmable: Yes, 1 Lamps, Thermal Protection: Class P, Ballast Factor: 1, Threaded Mount, 18 in L x 1 in W x 1.18 in H

Amperage Rating       :      0.28/0.14/0.12 A
Dimensions       :      18 in L x 1 in W x 1.18 in H
Dimmable       :      Yes
Frequency Rating       :      50/60 Hz
Minimum Starting Temperature       :      10 deg C
Mounting Type       :      Threaded
Number of Lamps       :      1
Power Factor       :      >0.95
Thermal Protection       :      Class P
Total Harmonic Distortion       :     
Type       :      Electronic
Wattage       :      33.6/33 W
Lamp Type       :      T5 Linear Fluorescent
Lamp Wattage       :      28 W
Voltage Rating       :      120/240/277 VAC
Start Type       :      Programmed/Rapid
Ballast Factor       :      1
  • Hi-Lume® 3D ballasts deliver high dimming ratios and efficiency in a slim-profile enclosure, making it a great choice for low-profile architectural fixtures
  • Because Hi-Lume® 3D is microprocessor-controlled, it can operate on the EcoSytem digital control bus and has the ability to listen, think, decide and remember, this provides a new level of flexibility in configuring lighting while saving energy
  • Continuous, flicker-free dimming from 100% to less than 1% for T8, 1% for T5 and T5-HO and 5% for T5 Twin-tube
  • Programmed rapid start design preheats lamp cathodes before applying full arc voltage to enhance lamp life
  • Lamps turn on to any dimmed level without flashing to full brightness
  • Low harmonic distortion throughout the entire dimming range maintains power quality
  • Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz
  • Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, relay failure and component life degradation
  • Ballasts maintain consistent light output for different lamp lengths, ensuring fixture uniformity
  • Ultra quiet operation
  • Protected from miswires of any input power to control lead, or from lamp leads to each other and ground
  • <=90% non condensing relative humidity, 75 deg C max ballast case temperature, class A sound rating
  • videoVIDEO LINK https://www.youtube.com/watch?v=3SxmA3ubihc