ProTek Double-Hinged cabinets are an excellent, off-the-shelf choice for mounting 19-in. rack, panel-mounted devices or other electronic equipment. The cabinets are designed to provide both front and rear access to 19-in. rack-mounted equipment. They provide protection against water, dirt, corrosive agents and other contaminants. ProTek is an excellent choice for applications where space is at a premium and the only option is wall mounting. ProTek comes in a broad range of sizes, materials and configurations to meet many demanding applications.

Hoffman PROTEK® Electrical Cabinet, Double Hinged Window Door, Series: DWDH2, 24.09 in Length, 23.62 in Width, 24.02 in Depth, NEMA 4/4X/12, 2 Doors, Rack Unit: 12RU, 1.11 in THK Door, Keyed Wing Knob Lock, 3.6 A, 115 VAC, 250 lb, Wall Mount, -40 to 131 deg F, Painted Steel, Polyester Powder Painted/Smooth Grain, Light Gray

• Doors made of 16 ga, center and wall sections made of 14 ga steel
• Stainless steel enclosures made from type 304 stainless steel
• Window made of 1/4 in THK, scratch and impact-resistant safety glass
• Front and rear access to 19 in rack equipment provided by three part design door, center section and wall section
• Solid door provides complete physical and visual protection
• Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection
• All seams are fully welded and ground smooth
• Doors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the cabinet
• Premium seamless, foam in place gasket prevents contaminants from entering the cabinet
• Key locking wing knob is included on painted steel cabinet, providing access control to the cabinet, two keys are included with each cabinet
• Stainless steel cabinet is provided with a quarter turn slotted latch
• One set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted front to back, is provided with each center section of the cabinet, additional tapped or square hole rack angles can be added to the cabinet to provide additional mounting
• On 28 in (700 mm) wide enclosures, a 4 in vertical cable manager with composite fingers is provided on hinge side of cabinet
• Wall section welded panel studs which accommodate standard panels

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_PTHW242424G2_Installation_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_PTHW482428G2A_Specification_Sheet.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/nVent_HOFFMAN_F1010G36_Warranty.pdf