Crouse-Hinds series explosionproof unions are installed in rigid/IMC conduit systems to connect conduit to conduit, a conduit fitting, junction box or device enclosure. Expansion unions are also available, which allow for expansion and contraction of conduit and compensate for conduit cut too short. Available in a variety of materials, including stainless steel, to suit customer preferences. Explosionproof elbows allow for a 90 change in direction to the conduit run, or when terminating at a box or fitting. Elbows are available with certifications for NEC Class I and II environments, as well as IEC Zone 1, 2, 21 and 22 applications.

Crouse-Hinds Condulet® Service Entrance Pulling Elbow, Series: LBY, 1/2 in Trade, 90 deg Angle, For Use With: IMC/Rigid Conduit, Feraloy® Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 2-13/16 in L x 2 in W Dimensions

• Maximum volume for bends within a compact overall size
• Threaded cover for ease of installation and removal
• Cover openings on an angle, permitting conductors to be pulled straight through either hub
• Taper tapped hubs and integral bushing for standard threaded conduit
• Make 90 deg bends in conduit systems where space is limited
• Act as pull outlets
• Provide access to conductors for maintenance and future system changes

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Crouse_Hinds_LBY15_Specification_Sheet.pdf
• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_7008287bdd9ca7b120b82cfb4abc19d9f914fac151099020494f3eea1fec1b6d.pdf